top of page
Search

LED lighting for bedroom and bathroom installers: wardrobes, vanity units and IP ratings

Writer: Simon Thorne
Simon Thorne
Oct 26
2 min read

Fitted bedrooms and bathrooms ask the same few things of LED lighting: a light that comes on when a door opens, an even line under a unit, and the right IP rating for where it sits. SEElight's Twilight 12V system covers the furniture side with one matched set of tape, drivers, sensors and connectors, from an independent LED manufacturer in Milton Keynes with the stock on the shelf.


Wardrobes and bedroom furniture


  • Hinged wardrobes. Fit a door sensor. The TWL-S34 single door sensor keeps the light on while the door is open and off when it shuts. With the TWL-S32 double door sensor, either door turns it on. Both come in chrome or black.

  • Walk-in wardrobes and dressing areas. The TWL-S33 motion sensor (chrome) stays on for about 25 to 30 seconds after the last movement.

  • Dressing tables and shelving. The TWL-S31 touch sensor: tap on or off, hold to dim, and it remembers the level.

  • Tape. 8 mm IP20 tape for the dry runs inside wardrobes and along shelves.


Vanity units and bathroom furniture


In a fitted bathroom, Twilight goes in and under the furniture: along the underside of a vanity unit, and inside tall units and wall cabinets, on a door or motion sensor so nobody hunts for a switch. Our circular cabinet downlights are IP20, so they belong inside units and other dry spots.


IP ratings: what goes where


  • IP20 tape is for dry runs.

  • IP65 tape is the silicone-coated version. It's for kitchens and bathrooms, and for indoor use only. The connectors themselves aren't IP-rated.


Runs and drivers


Same rules as a kitchen. No run over 5 m, and 3.5 m per run for COB tape. The driver's wattage covers all its runs together: COB tape at 9 W/m runs to 2.8 m in total on the 26W driver, so a bigger job takes the 60W driver or a second one. The TWL-D26P (26W) and TWL-D60P (60W) plug-in drivers come with a UK plug supplied but not fitted. Connect the tape with the TWL-A37 lead and a TWL-A52 connector (slide it in, squeeze with pliers), or use the pre-wired TWL-A55 (COB and IP20 tape only), which clips on with a thumb push but can't be extended.


Getting it


Buy online through stockists such as J&A Doors and LED Spares, or from the wholesalers and showrooms on our Where to Buy page; ring the branch first to check stock. Installing regularly? Ring 01908 313 083 or email sales@seelight.co.uk and we'll sort your trade pricing: no account forms, no hoops.

 
 
bottom of page