top of page
Search

LED lighting for a kitchen, bedroom or bathroom fit-out: spec it once, fit it once

Writer: Simon Thorne
Simon Thorne
Oct 26
3 min read

An independent LED manufacturer's guide for KBB fitters and wholesalers, using the Twilight system. UK stock.


Most lighting problems on a KBB job start at the wholesaler's counter, not on site. Tape from one brand, a driver from another, downlights from a third, and you hope the colour temperatures roughly agree. They usually don't.


We built the Twilight system to take that guesswork out. SEElight is an independent LED manufacturer in Milton Keynes. Twilight is our own connected range for kitchens, bedrooms and bathrooms: tape, downlights, drivers, sensors and colour control, all made to match and held in UK stock.


Here's how to spec it.


What's in the range


  • LED tape: 8 mm wide, IP20 for dry runs, IP65 for kitchens and bathrooms

  • Downlights: circular; black, white, silver or chrome

  • Drivers: 12V plug-in, TWL-D26P (26W) and TWL-D60P (60W), UK plug supplied, not fitted

  • Sensors: TWL-S31 touch dimmer, TWL-S34 single door, TWL-S32 double door, TWL-S33 motion

  • Colour control and connectors: a CCT remote, and the TWL-A37 lead with a TWL-A52 connector (or the pre-wired TWL-A55 for COB and IP20 tape)


Picking the tape: IP20 or IP65


IP20 tape handles the dry work: under-cabinet, plinths and kickboards, wardrobes, coving. IP65 tape is the silicone-coated version. It's for kitchens and bathrooms, and for indoor use only; the connectors themselves aren't IP-rated. Same range, matched colour, so one room doesn't end up glowing a different white from the next.


Downlights and colour temperature


Circular, in four finishes to suit the units: black, white, silver and chrome. You're not stocking a different brand for each room.


Sizing the driver


Drivers are 12V plug-in, in 26W and 60W. Keep every run to 5 m or less (3.5 m for COB tape), so a long kitchen is several runs, each fed directly from the driver. The driver's wattage covers all its runs together: COB tape at 9 W/m runs to 2.8 m in total on the 26W driver, so a bigger job takes the 60W driver or a second one.


Controls, without the faff


For most jobs, the sensors do the work: the cupboard lights when it opens, the plinth lights when someone walks past. For a customer who wants more, the TWL-SZC1 Zigbee controller and TWL-SRC1 8-zone remote add app and voice control (through a Zigbee hub) or handheld control to 12V strip, including Twilight tape: up to eight zones from one remote, 30 m range. One system, whether they want a wall panel, a remote or their phone.


For wholesalers


One matched range is easier to stock than five half-ranges. Twilight covers the common KBB jobs, sits in UK stock, and comes with a trade catalogue so counter staff can spec it without ringing us. We'll loan you a Twilight display board too, so customers see it lit up on your wall.


And if the job needs something odd


We manufacture, so if a job calls for a fitting that isn't in the standard range, we can usually make it to spec. Most jobs don't need that, the standard system covers them, but the option's there when it counts.


Spec your next job


Download the trade catalogue, or send us the job and we'll spec the fittings. Ring 01908 313 083 or email sales@seelight.co.uk for trade pricing, or find a stockist on our Where to Buy page. Twilight, from an independent LED manufacturer that holds UK stock and answers the phone.

 
 
bottom of page