top of page
Search

Under-cabinet and plinth LED strip: where fitters and wholesalers get it

Writer: Simon Thorne
Simon Thorne
Oct 26
2 min read

Most kitchen lighting jobs come down to two runs of LED strip: one under the wall cabinets and one along the plinth. Fitters usually buy it from an electrical wholesaler or a kitchen supplier, and wholesalers buy it from a maker. SEElight is one of those makers: an independent LED manufacturer in Milton Keynes, selling its Twilight 12V system to the trade, direct and through stockists.


What a kitchen run needs


One matched system, not a driver from one shelf and tape from another. Twilight covers the lot:


  • Tape. 8 mm 12V LED strip in 120 LED, 240 LED and COB. IP20 suits the dry runs under the wall units and along the plinth. IP65 tape is the silicone-coated version, for kitchens and bathrooms, indoors only.

  • Drivers. The TWL-D26P (26W) and TWL-D60P (60W) plug-in drivers, with a UK plug supplied but not fitted.

  • Sensors. For the plinth, the TWL-S33 motion sensor stays on for about 25 to 30 seconds after the last movement. Under the wall units, the TWL-S31 touch sensor: tap on or off, hold to dim, and it remembers the level.

  • Connections. The TWL-A37 lead with a TWL-A52 connector: slide the tape in and squeeze it shut with pliers. Or the pre-wired TWL-A55 for COB and IP20 tape, which clips on with a thumb push but can't be extended.


Along the plinth it's a continuous line of light, not a row of round plinth lights.


The run-length rule that saves call-backs


Keep every 12V run to 5 m or less. For COB tape we recommend 3.5 m per run; 120 LED and 240 LED tape are fine up to 5 m. So a long kitchen is several runs, each fed directly from the driver, not one long one. Then check the driver: its wattage covers all its runs together, and COB tape at 9 W/m runs to 2.8 m in total on the 26W driver, so a bigger kitchen takes the 60W driver or a second one. Our Helpful Videos page shows the wiring.


For wholesalers: stocking it


One range covers the common kitchen jobs, so the counter isn't juggling five half-ranges from five suppliers. Trade pricing is a phone call, with no account forms. We'll loan you a Twilight display board, so customers see the range lit up on your wall, not in a catalogue. And it's held in UK stock in Milton Keynes, not stuck on a boat: order today and it's on its way. The trade catalogue lists the range with its part codes, so counter staff can spec a job without ringing us.


Where fitters can buy it


Online through stockists such as J&A Doors and LED Spares, or from the electrical wholesalers and showrooms on our Where to Buy page. Ring the branch first to check they have your length and colour.


Trade pricing


Fit kitchens, or run a trade counter? Ring 01908 313 083 or email sales@seelight.co.uk, tell us what you're after, and we'll sort your trade pricing. You'll be dealing with someone who knows the product.

 
 
bottom of page